Gates
Bourbon groundload trailers come standard with full swing gates on the trailer interior.  Instead of full gates, you can upgrade to the following gate styles:

  • 50/50 Swing Gate - 50/50 swinging door built inside a full swinging gate.  The 50/50 door can be positioned on the driver or passenger side and has its own slam latch.  It opens toward the rear of the trailer.  The full gate still swings through both directions with the 50/50 gate inside.  This gate can be interchanged with other full gate designs.
  • Chute Gate - Sliding chute gate built inside a full swinging gate.  The chute can be positioned on the driver or passenger side and opens smoothly with the use of roller bearings.  The full gate still swings through both directions with the chute gate inside.  This gate can be interchanged with other full gate designs.
  • 60/40 Fixed Gate - 60% of the gate has a swinging door with a slam latch, and 40% is a fixed wall and does not swing.  This gate creates the safety triangle for operators to stay behind when loading livestock, but it is not interchangable with full swing gates.

You choose where you want your gates positioned in the trailer, as well as the hinge placement, to fully customize the trailer to meet your needs.

Chute Alley
An optional chute alley can be added between the rear sliding chute gate and the first interior gate at the top of the ramp to easily guide the livestock into the trailer and up the ramp.  The chute alley folds out from the rear gate and connects to the 50/50 swing door at the top of the ramp (upgrade required).  The chute alley folds neatly behind the rear gate for easy stowing so that full access to the lower deck is available for use.

Corashield
Corashield Anti-Chip Coating prevents chipping, cracking, and marring of painted surfaces.  The Corashield upgrade can be applied to the underside of your groundload trailer to provide additional protection against gravel and flying debris.  In addition, the Corashield will be applied to the lower 18" of the interior trailer walls to protect against damage due to livestock kicking.  After the trailer is sandblasted and the marine-quality primer is applied, Corashield anti-chip coating is applied, then finished with a top coat of Bourbon's high solids urethane paint.

Worklights
The optional Rear Worklight Package allows you to illuminate a large working area behind the trailer if you're loading livestock in the dark.  (2) 3x5 LED lights are mounted above the rear exterior gate.  The lights can swivel up or down and produce 2000 lumens of light in a flood beam pattern for intense light right where it's needed.

 





Gates
50/50 swing gate built into full gate
Gates
50/50 swing gate open in full gate.
Gates
Double slam latches on flooor for full gate and 50/50 swing gate.
Gates
Open chute gate in rear.
Gates
Slam latch on 50/50 swing gate.
Chute Alley
Chute alley folded and stowed hebind rear gate.
Chute Alley
Chute alley connecting between rear door and 50/50 swing door at top of ramp.
Chute Alley
Exrra bracing provides strength and braces easily stow on wall.
Corashield
Corashield Anti-Chip texture on wall.
Worklights
3x5 LED worklight illuminated.
Worklights
Rear Worklight Package mounted above rear exterior gate.
Worklights
Rear worklight swiveled down.
Worklights
Distribution of 2000 lumens per woklight.

CONTACT US

KJD Enterprises, Inc.
2700 Virgil Gray Drive
Brownwood, Texas 76801
Telephone:
325-641-0420
Fax: 325-641-8376

Email: KJDSales@gmail.com

kdloaders
Brownwood, Texas

http://kdloaders.com